020 8556 4147

Mon-Fri: 9:00-17:00 Sat: by appointment only


Home › Blinds Glossary › Blinds for Schools

Blinds for Schools – what are they?

Blinds for schools are window coverings specified for educational premises, where three requirements have to be met at once: they must be safe for children, they must satisfy the fire regulations applying to a public building, and they must survive years of hard use by people who did not choose them and will not treat them gently.

Every other consideration follows from those three. Appearance matters far less than whether a cord can form a loop, whether a fabric carries the right certificate, and whether a broken slat can be replaced next term without redoing the whole classroom.

Child safety and BS EN 13120

Looped blind cords and chains have caused fatalities among young children, and UK internal blinds have been subject to BS EN 13120 since 28 February 2014. The standard applies to premises where children aged 0–42 months are likely to be present, which in an education setting covers nurseries, early years provision and any area accessible to visiting families.

  • Cordless is the correct default — Wand-operated, spring-operated and motorised blinds create no loop at all. In a school this is the specification to start from, rather than fitting safety devices to a corded blind.
  • Where cords are unavoidable — The standard requires safety devices — breakaway connectors that separate under load, cord cleats, chain tensioners and P-clips — installed so no hazardous loop can form.
  • Height requirements — Operating pull cords are required to be kept a minimum of 1.5m from the floor, and accumulation devices such as cleats must be installed no lower than 1.5m. Chains fitted with a breakaway system must have their lowest point no less than 0.6m above the floor.
  • Breakaway performance — Breakaway devices are required to release when a load of around 6kg is applied, so a loop cannot hold a child's weight.
  • Warning labels — Blinds must be supplied with the mandatory warning about strangulation risk, and these should not be removed after installation.

Motorised blinds sidestep the whole issue and are increasingly specified in new-build and refurbished schools for exactly that reason — a motor takes the cord out of reach altogether.

Fire regulations

Schools are public buildings and blind fabrics form part of the fire loading of a classroom:

  • BS 5867 Part 2 — The British Standard covering the flammability of fabrics for curtains, drapes and window blinds. School blinds should be supplied with certification to the type required by the building's fire strategy.
  • Inherently flame retardant, not treated — Applied flame-retardant treatments can wash out or degrade. Inherently FR fabrics keep their performance for the life of the blind and are the sensible specification.
  • Documentation — Fire risk assessors and insurers will ask for fabric certificates. Keep them with the building's fire documentation rather than with the invoice.
  • Escape routes — Blinds on corridor and stairwell glazing must not obstruct escape routes or emergency signage when lowered.

What classrooms actually need

  • Glare control on whiteboards and screens — The commonest daily complaint. A mesh cloth cuts glare while keeping the room daylit — closing the blinds entirely and switching the lights on is the failure mode to design out.
  • Blackout where teaching requires it — Science labs, drama and music rooms, AV suites and early-years sleep rooms need genuine darkness. That means an opaque cloth held in side channels, not simply a coated fabric, because light still leaks around an open edge.
  • Overheating control — Large glazed elevations on south-facing classrooms create a summer problem that affects concentration. Reflective screen fabrics address the heat before it enters.
  • Durability — Contract-grade headrails and components, and PVC or aluminium rather than absorbent fabric in practical rooms.
  • Replaceable parts — Vertical blind louvres and Venetian slats can be replaced individually — a significant advantage where damage is a certainty rather than a risk.
  • Hygiene — Wipe-clean surfaces in food technology rooms, science labs and early years settings.

Specifying and installing in a live school

  • Safeguarding — Installers working in an occupied school will normally require DBS clearance and must comply with the school's safeguarding policy.
  • Holiday programming — Most school installations are scheduled into half-terms and holidays, which means orders have to be placed well in advance of the fitting window.
  • Consistency across the building — Specifying one fabric range across a school makes future replacement straightforward and keeps the external appearance uniform.
  • Anti-ligature considerations — In SEN provision, pastoral rooms and some care settings, additional anti-ligature requirements may apply and should be raised at survey stage.
  • Documentation pack — Fabric certificates, installation records and cord-safety compliance statements should be handed over on completion and retained.

Interested in blinds for schools? See the fitting service.

Read also

What are commercial blindsCommercial blinds are window coverings specified, manufactured and installed for non-domestic buildings…
What are blackout blindsA blackout blind is a blind made from fabric that light cannot pass through. The opacity comes from a…
What are cassette blackout blindsA cassette blackout blind is a blackout blind fitted inside a three-part enclosure: a headbox (the…
What are electric blindsAn electric blind is any blind whose raising, lowering or tilting is driven by a motor rather than by…

← Back to the Blinds Glossary