020 8556 4147

Mon-Fri: 9:00-17:00 Sat: by appointment only


Home › Blinds Glossary › Office Blinds

Office Blinds – what are they?

Office blinds are internal window coverings specified for a working environment, where the requirements are different from those of a home. The blind is not there primarily to decorate or to give privacy at night — it is there to keep daylight usable at a desk, to stop solar gain overheating the space, and to meet the fabric and safety standards that apply to a place of work.

That shift in priorities changes almost every decision: fabric openness rather than colour, headrail durability rather than appearance, fire certification rather than pattern, and control systems that a whole floor can use rather than a single householder.

The core problem: glare on screens

Daylight falling onto or behind a monitor causes reflections and forces the eye to adapt constantly between bright and dark areas, which is what produces the headaches and eye strain associated with poorly lit offices.

  • It is a regulated issue — The Health and Safety (Display Screen Equipment) Regulations 1992 require workstations to be arranged so that sources of light do not cause disturbing glare, and that windows are fitted with an adjustable covering to attenuate daylight falling on the workstation. Blinds in an office are therefore a compliance item, not just a furnishing.
  • Blocking light is not the answer — Closing a blind entirely removes the glare and the daylight together, which pushes the space onto artificial light all day. Good office blinds attenuate rather than exclude.
  • Solar screen fabric is the standard solution — A woven mesh that cuts glare and UV while preserving an outward view — the reason it dominates commercial specification.
  • Openness factor — The percentage of open weave in a screen fabric, typically 1%–10%. A 1% fabric gives maximum glare control and privacy with a dim view; a 10% fabric preserves the view and daylight but controls glare less. 3%–5% is the usual commercial compromise.
  • Fabric colour matters as much as openness — Dark screen fabrics absorb light and give the sharpest view out with the least glare. Light fabrics reflect more solar heat but can themselves become a bright surface in the field of view.

Which styles are used in offices

  • Roller blinds in solar screen fabric — The default for modern offices. Clean lines, minimal hardware, and precisely specifiable glare performance. Multiple blinds can be linked on a shared headrail across a curtain-wall façade.
  • Vertical blinds — Still widely used, particularly on older buildings and floor-to-ceiling glazing. Their advantage is that louvres can be angled to deflect low sun without covering the window, keeping daylight in the space.
  • Aluminium Venetian blinds — Excellent tilt control for individual offices and meeting rooms, wipe-clean, and available in corporate colour matches.
  • Blackout roller blinds — Specified in boardrooms, training rooms and any space with projection. Usually alongside a screen blind on a double bracket.
  • Motorised blinds — Standard on atria, high-level glazing and large façades, often with sun sensors so the building responds automatically to solar gain, the motor sitting in the headrail rather than a chain at the side.

Specification requirements that do not apply at home

  • Fire retardancy — Fabrics used in workplaces are normally required to be flame retardant and certified to BS 5867 Part 2. Domestic fabrics are not automatically compliant, and substituting one on a commercial job is a genuine liability.
  • Contract-grade components — Headrails, clutches and brackets rated for far more operating cycles than domestic equivalents. An office blind may be operated several times a day, every working day, for a decade.
  • Cord safety — BS EN 13120 targets premises where children under 42 months may be present, so a conventional office is outside its intended scope — but any workplace with public or family access, such as a reception area, nursery or healthcare setting, should be treated as in scope.
  • Antimicrobial and wipe-clean finishes — Common in healthcare, laboratories and food-related premises.
  • Landlord and lease constraints — Many commercial leases and building management agreements specify a uniform blind colour or fabric visible from outside, so the external appearance may not be a free choice.
  • Access and installation — Working at height, out-of-hours fitting and coordination with other trades are normal parts of a commercial installation and should be priced into a quotation.

Getting the specification right

A practical sequence for an office project:

  • Assess orientation — South and west elevations need the lowest openness factors and the most heat rejection. North-facing glass often needs little more than privacy.
  • Map the workstations — Glare depends on where people sit relative to the window, not on the window alone.
  • Decide on control zoning — Whether each blind is operated individually, in groups per bay, or automatically by sensor.
  • Confirm fire and lease requirements — Before selecting fabric, not after.
  • Plan for maintenance — Agree who cleans and services the blinds, and confirm that replacement slats, louvres and fabrics will be available in the same range in three years' time.

Interested in office blinds? See the fitting service.

Read also

What are commercial blindsCommercial blinds are window coverings specified, manufactured and installed for non-domestic buildings…
What are vertical blindsA vertical blind is made up of a row of fabric louvres (also called vanes or slats) that hang from a…
What are allusion blindsAn Allusion blind is a window covering made from soft fabric vanes hung against a sheer backing, so…
What are electric blindsAn electric blind is any blind whose raising, lowering or tilting is driven by a motor rather than by…

← Back to the Blinds Glossary