Home › Blinds Glossary › Perfect Fit Blinds
Perfect Fit Blinds – what are they?
A Perfect Fit blind is a blind held in a slim frame that clips into the rubber beading between the glass and a uPVC window frame. Nothing is screwed, drilled or glued: small brackets slide under the gasket, the frame pushes onto the brackets, and the blind is held tight against the glass.
The result is a blind that behaves as though it were part of the window. Because it is attached to the opening sash rather than to the wall, it swings with the window when you open it, sits entirely within the frame, and leaves the sill and reveal completely clear. Perfect Fit is a system rather than a blind type — roller, Venetian, pleated and honeycomb blinds are all available within it.
How the frame system works
The whole design rests on a feature common to almost all UK uPVC windows: the flexible rubber bead that seals the glass into the frame.
- Brackets — Small plastic clips are pushed into the gap between the glazing bead and the frame, three or four per window. They grip by compression, leaving no marks and no holes.
- Frame — A four-sided extruded frame, usually 20–25mm deep, colour-matched to white, anthracite, cream or woodgrain uPVC. It snaps onto the brackets.
- Blind unit — The roller, slat set or pleated stack is pre-assembled inside the frame at the factory, so the finished blind arrives as a single item.
- Side guides — Because the fabric or slats run within the frame on both sides, the blind stays flat against the glass and cannot swing — even when the window is fully open.
Fitting takes roughly ten minutes per window and requires no tools, which is why the system is popular in rented property, new-build homes and anywhere the occupier cannot drill into the structure. Removal is equally clean: the frame unclips and the brackets pull out, leaving the window exactly as it was.
Which windows and doors it suits
Perfect Fit is not universal. Compatibility is decided by how the glazing is held in:
- Suitable: internally beaded uPVC windows — The standard UK domestic window. The bead is on the room side, so the brackets are accessible.
- Suitable: tilt-and-turn windows — Arguably the best use case — the blind moves with the sash instead of being knocked by it.
- Suitable: French and bifold doors — The blind stays flat against the glass whatever the door is doing, and a cut-out can be specified around the handle.
- Suitable: conservatories — Frames can be made for the raked and shaped sections that defeat conventional blinds.
- Not suitable: sliding patio doors — There is insufficient clearance between the two sliding panes for the frame depth.
- Not suitable: externally beaded or tape-glazed windows — With no accessible internal bead, there is nothing for the brackets to grip.
- Not suitable: timber and most aluminium frames — These generally lack the compressible gasket the system relies on. A surveyor should confirm before ordering.
Why people choose Perfect Fit
- No drilling — Nothing is fixed into the frame, the reveal or the wall. This matters in rented homes, listed buildings and anywhere a warranty could be voided by drilling into a uPVC frame.
- Inherently child-safe — There are no hanging cords or chains. Control is by a small handle or wand within the frame, which removes the BS EN 13120 looped-cord hazard entirely — a significant reason for its use in nurseries and family homes.
- The window still opens — Because the blind travels with the sash, windows can be opened and closed normally with the blind down.
- Clear sills — The blind takes up no reveal depth, leaving the windowsill fully usable.
- No draughts or swinging — The enclosed frame stops the blind lifting in a breeze, which is a common annoyance with conventional blinds on an open window.
The trade-off is that a Perfect Fit blind covers the glass only, not the frame, so it cannot control light leaking around the window edge. It is a privacy and light-filtering solution rather than a blackout solution.
The four Perfect Fit blind types
The frame is the same; the blind inside it is what you choose:
- Perfect Fit roller blinds — Simplest and slimmest, with the full range of roller fabrics from screen to blackout.
- Perfect Fit Venetian blinds — Tiltable aluminium or wood-effect slats, usually 25mm, for adjustable light control.
- Perfect Fit honeycomb blinds — Cellular fabric that traps air, giving the best thermal performance of the four.
- Perfect Fit pleated blinds — Crisp concertina fabric, often with a solar-reflective backing for conservatories.
Interested in perfect Fit blinds? See the fitting service.