Why you might need to shorten electric blinds
Electric blinds are a sleek, modern solution that brings comfort and convenience to your home or office. Whether you’ve moved them to a new window or found that they extend slightly too far, adjusting the length can improve their appearance and ensure smooth operation. Because they contain motors and wiring, however, shortening them requires precision and care.
Before you begin
Electric blinds operate using a motorised roller or tension system, often controlled by a remote or smart device. Shortening these blinds isn’t as simple as trimming fabric — you’ll be working around electrical components and need to maintain the correct tension for safe use. Before attempting any changes, fully lower the blind and measure the excess length.
If your blind includes integrated wiring, a cassette housing, or built-in sensors, it’s strongly recommended to contact professionals such as Electric blinds with fitting service before attempting modifications.
Step-by-step guide to shortening electric blinds
- Disconnect the power: Unplug or turn off the power supply to avoid accidental activation. For hardwired systems, switch off the circuit at the mains.
- Remove the blind from its brackets: Carefully lift the blind out of the mounting brackets while supporting the roller to prevent strain on the motor.
- Expose the fabric: Unroll the blind fully on a flat surface to see how much needs to be removed.
- Detach the bottom bar: Slide or unclip the weighted bar from the hem pocket.
- Mark and trim the fabric: Measure the new desired length and use a sharp blade or scissors to cut the fabric evenly, leaving a small allowance (about 2 cm) for reattaching the bar.
- Refit the bottom bar: Slide it back into place and check that it’s straight and secure.
- Reinstall and test: Refit the blind to its brackets, reconnect the power, and test the motor to ensure the fabric rolls smoothly to the new length.
Common issues and troubleshooting
If the blind stops short or rolls unevenly, recalibrate the motor limits according to the manufacturer’s instructions. For systems with smart controls, re-pair the remote or app after adjustment. Uneven rolling usually means the fabric isn’t aligned perfectly on the roller — unroll and refit it carefully.
Because electric blinds vary in design, complex systems should only be adjusted by professionals offering Electric blinds with fitting service to prevent electrical damage or motor failure.
When to call in the professionals
Working with powered mechanisms can be risky if you’re not familiar with their construction. The experienced team at Kelly’s Blinds can safely shorten, reprogram, and refit your electric blinds to ensure perfect tension, smooth movement, and long-term reliability.
What to do next
If your electric blinds are too long or need a performance check, explore Electric blinds with fitting service for expert help. Professional servicing ensures your blinds look great and function flawlessly.
FAQ – How to Shorten Electric Blinds?
Can I shorten electric blinds myself?
Only basic adjustments — such as trimming excess fabric — should be done yourself. Anything involving the motor should be handled by a professional.
How do I recalibrate the blind after shortening?
Use your remote control or wall switch to reset the upper and lower stop limits according to your model’s manual.
Can shortening damage the motor?
If done incorrectly, yes — which is why it’s best to have motorised blinds shortened by trained specialists.
