Perfect Fit blinds are designed to sit neatly within your window frame, creating a sleek, modern look without the need for drilling or screws. Because they’re made to measure, it’s rare that adjustments are needed — but occasionally, if you move the blinds to a new window or they were slightly mismeasured, shortening them may be necessary for a flawless fit.
Before you begin
These blinds operate on a tensioned system, meaning the fabric or slats are held within a frame that clips directly to the window. Shortening them isn’t as straightforward as trimming a standard roller or vertical blind, as it involves adjusting cords or fabric tension rather than cutting. Before attempting this, double-check whether the issue lies with the blind’s positioning or tension, as sometimes re-tensioning the cords is all that’s needed.
If in doubt, it’s best to seek expert advice from professionals such as Perfect Fit blinds with fitting service who can ensure the frame, cords, and tension system remain intact during adjustment.
Step-by-step guide to shortening Perfect Fit blinds
- Remove the frame from the window: Use a flat tool or card to release the clips holding the frame in place, taking care not to damage the uPVC.
- Detach the tension cords: These run vertically through the blind to keep the fabric or slats taut. Unclip or untie them carefully from the frame corners.
- Measure and adjust: Determine how much shorter you need the blind to be. For fabric versions, roll the fabric up slightly and retie the cords; for slatted styles, remove one or two bottom slats if necessary.
- Reattach the cords: Feed them back through the frame channels, keeping even tension on both sides to maintain smooth operation.
- Clip the frame back into position: Once adjusted, refit the frame into the window and test the blind to ensure it raises and lowers evenly.
Common issues and troubleshooting
If your blind appears uneven after refitting, check that the tension cords are balanced equally on both sides. Wrinkled fabric usually means the tension is too loose, while stiffness suggests it’s too tight. For frame adjustments, make sure the clips are fully seated to prevent rattling or misalignment.
Because Perfect Fit blinds rely on precise engineering, any major adjustment beyond re-tensioning is best handled by specialists providing Perfect Fit blinds with fitting service to avoid damaging the frame or cords.
When to call in the professionals
These blinds require a delicate touch and a good understanding of their frame system. If you’re unsure how to shorten them properly or suspect the issue is with the frame rather than the blind, contact the team at Kelly’s Blinds. They can inspect, adjust, or refit your blinds to ensure a perfect, lasting result.
What to do next
For expert advice or precision adjustments, explore Perfect Fit blinds with fitting service to guarantee your blinds look and function exactly as they should.
FAQ – How to Shorten Perfect Fit Blinds?
Can I shorten Perfect Fit blinds myself?
You can make small adjustments by re-tensioning or removing slats, but avoid cutting or altering the frame.
What tools do I need?
A flat tool to unclip the frame and a screwdriver or pliers to adjust the tension cords are usually enough.
What if the blind still doesn’t fit after shortening?
If the issue persists, it’s best to have professionals refit or resize the blind to ensure a clean, safe result.
